'
Available 24/7 at
1800AWNINGS
Short answer: a made-to-order, American-built retractable awning costs $3,064 to $10,019 for residential sizes, delivered free to the 48 states. Commercial spans to 40 feet run $9,477 to $23,225. Motorization adds $665 to $806. Installation, if you don't do it yourself, is quoted separately.
Every price on this page is the live, current price from our own store — not an estimate or a national average. Updated August 2026.
Most cost guides publish a range because the companies writing them won't show their prices. These are ours. The table below is the complete Sunscape® price grid — our entry residential system, all-aluminum frame, solution-dyed acrylic fabric, made to order in Tampa.
| Width | 6 ft projection | 8 ft | 10 ft | 11 ft 6 in |
|---|---|---|---|---|
| 8 ft | $3,064 | — | — | — |
| 9 ft | $3,112 | — | — | — |
| 10 ft | $3,155 | $3,442 | — | — |
| 11 ft | $3,258 | $3,548 | — | — |
| 12 ft | $3,567 | $3,946 | $4,191 | — |
| 13 ft | $3,615 | $3,989 | $4,239 | $4,699 |
| 14 ft | $3,659 | $4,037 | $4,284 | $4,743 |
| 15 ft | $3,707 | $4,082 | $4,331 | $4,791 |
| 16 ft | $4,071 | $4,446 | $4,871 | $5,273 |
| 17 ft | $4,116 | $4,494 | $4,914 | $5,318 |
| 18 ft | $4,164 | $4,541 | $4,962 | $5,365 |
| 19 ft | $4,207 | $4,585 | $5,007 | $5,410 |
| 20 ft | $4,518 | $4,983 | $5,403 | $5,894 |
| 21 ft | $5,469 | $6,009 | $6,452 | $7,056 |
| 22 ft | $5,514 | $6,057 | $6,495 | $7,100 |
| 23 ft | $5,562 | $6,102 | $6,543 | $7,148 |
| 24 ft | $5,871 | $6,412 | $6,938 | $7,629 |
A dash means that combination isn't offered — deeper projections need more width to carry the arm load safely.
Contractors and cost guides often quote awnings per linear foot. Here's what that actually works out to on real configurations:
| Configuration | Price | Per linear foot |
|---|---|---|
| 10 ft × 8 ft | $3,442 | $344 |
| 12 ft × 10 ft | $4,191 | $349 |
| 14 ft × 10 ft | $4,284 | $306 |
| 16 ft × 11 ft 6 in | $5,273 | $330 |
| 20 ft × 11 ft 6 in | $5,894 | $295 |
Cost per linear foot drops as the awning gets wider, because the motor, hardware and end caps are a fixed cost spread over more fabric.
Retractable awnings on the big marketplaces run $450 to $1,500. The gap isn't margin — it's material. Budget units typically use thinner aluminum extrusions, polyester or vinyl fabric that fades within a few seasons rather than solution-dyed acrylic, lighter arm hardware with shorter travel, and are built to stock sizes so you fit your patio to the awning instead of the other way round. Ours are cut to your exact opening and built in our own Tampa factory.
A quality American-made retractable awning runs roughly $3,000 to $10,000 for residential sizes, before installation. At 1800Awnings a Sunscape starts at $3,064 for an 8 ft x 6 ft and reaches $7,629 at 24 ft x 11 ft 6 in. Imported units sold on marketplaces run $450 to $1,500, but use lighter extrusions, shorter warranties and polyester rather than solution-dyed acrylic fabric.
A 12 ft Sunscape costs $3,567 with a 6 ft projection, $3,946 at 8 ft, and $4,191 at 10 ft. Projection — how far the awning reaches out from the wall — moves the price more than width does at these sizes.
Motorization on a Sunscape runs $665 to $806 depending on the motor and control package. A wind and rain sensor package that retracts the awning automatically in weather is a separate $730 to $2,314 depending on frame width.
Between roughly $220 and $385 per linear foot of width, depending on the size. Small awnings cost the most per foot and wide ones the least, because the motor, arms and end caps are a fixed cost.
No. Prices shown are for the awning delivered to your door, with free freight shipping to the 48 contiguous states. Every awning is made to order in Tampa, Florida, and ships in 2 to 3 weeks. Homeowners handling their own install pay nothing further; if you use a contractor, installation is quoted separately.
A protective hood and end covers run $356 to $1,126 depending on model and width, a drop valance for low-angle sun runs $853 to $1,873, LED lighting kits run $263 to $1,506, and a roof-mount kit for patios with no usable wall runs $616 to $1,480.
Thanks for subscribing!
This email has been registered!