Aluminum Awnings in Georgia — Built in Tampa, Shipped Statewide

1800Awnings builds custom aluminum awnings, canopies, pergolas, and Bahama shutters for homes and businesses across Georgia. Every unit is engineered, cut, welded, powder-coated, and crated at our own factory in Tampa, Florida, then shipped direct to your Georgia address — no dealer markup, no "closest available size." We have manufactured shade systems for the Southeast since 1987, and Georgia is one of our largest markets outside Florida.

Custom aluminum awning manufactured by 1800Awnings and shipped to Georgia

Georgia Awnings at a Glance

What we ship to Georgia
Retractable awnings, aluminum window & door awnings, architectural canopies, pergolas, Bahama shutters, motorized solar and hurricane screens
Where it is made
Our own factory at 4608 N. Hale Ave, Tampa, FL — roughly 450 miles from Atlanta
Shipping
Free freight shipping to all 48 contiguous states, including every ZIP code in Georgia
Sizing
Built to the exact inch — no standard-size compromises
Install options
DIY knock-down kits (pre-cut, pre-drilled, stainless hardware) or fully assembled crated units for contractor install
Georgia metros served
Atlanta, Savannah, Augusta, Columbus, Macon, Athens, Albany, Warner Robins, Valdosta, Roswell, Alpharetta, Marietta, Sandy Springs, Johns Creek, Gainesville, Brunswick, St. Simons Island, Rome, Dalton, Peachtree City
Phone
1-800-AWNINGS (1-800-296-4647)
Commercial aluminum awnings on a self-storage facility, the same construction shipped to Georgia commercial projects

Engineered for Georgia's Climate

Georgia asks two different things of an awning depending on where you live, and we build for both. In Atlanta and the Piedmont, the problem is heat load and humidity: west- and south-facing glass turns a house into a greenhouse from May through September, and the same humidity that keeps the state green rots wood pergolas and rusts steel frames within a few seasons. On the coast — Savannah, Brunswick, St. Simons, Tybee — you add salt air and tropical-system wind to the list, plus the historic-district design standards that make a stamped, off-the-shelf awning a non-starter.

Our answer is the same in both cases: all-aluminum construction that cannot rust, stainless steel fasteners at every connection, and architectural powder coating applied to 100% of the surface — top, bottom, and every edge — so humidity and salt have nothing to bite into. North Georgia customers get one more benefit: aluminum handles the occasional ice and snow load in the mountains around Blue Ridge, Dahlonega, and Ellijay far better than fabric, which sags, pools, and tears.

Custom-sized aluminum awning built to exact measurements for a Georgia home

You Are Buying from the Manufacturer, Not a Reseller

Most awning websites serving Georgia are dealers or drop-shippers reselling imported kits. We are the factory. That distinction is what lets us build any size to the exact inch, match a specific RAL color or aluminum woodgrain finish, and engineer mounting for brick, Hardie board, stucco, or a commercial storefront façade — the four wall types Georgia builders actually use.

It also changes the price. Buying direct removes the dealer margin that typically sits between a Georgia homeowner and the factory, and it means the person answering your call is a technician who can look at your photos, confirm your projection, and tell you exactly how the unit will attach. Support happens by phone, email, or video walkthrough while you are standing at the wall.

What We Build for Georgia Homes & Businesses

Retractable Awnings

Motorized & manual patio shade, built to size.

Aluminum Awnings

Window, door & storefront awnings that never rust.

Pergolas

Modern & coastal aluminum pergola systems.

Shutters

Bahama, colonial & architectural aluminum shutters.
Commercial open-tube aluminum awnings in a custom color on a retail storefront

Residential and Commercial Projects Across Georgia

On the residential side, the most common Georgia orders are retractable awnings over back decks and screened-porch extensions, window awnings on west-facing elevations to cut afternoon heat gain, and aluminum pergolas for outdoor kitchens. On the commercial side we ship canopies and storefront awnings to Atlanta retail centers, restaurant patios along the Beltline, self-storage developments, medical office entries, and multi-building apartment communities where a property manager needs twenty identical units delivered on one truck.

Commercial customers usually take fully assembled crated units so a local crew can hang them in a single day. Homeowners and handy DIYers usually take the knock-down kit, which arrives pre-cut and pre-drilled with stainless hardware and step-by-step instructions. Both are the same commercial-grade product.

Georgia Cities We Ship To

  • Atlanta
  • Savannah
  • Augusta
  • Columbus
  • Macon
  • Athens
  • Sandy Springs
  • Roswell
  • Alpharetta
  • Marietta
  • Johns Creek
  • Warner Robins
  • Albany
  • Valdosta
  • Gainesville
  • Peachtree City
  • Brunswick
  • St. Simons Island
  • Tybee Island
  • Rome
  • Dalton
  • Douglasville
  • Newnan
  • Kennesaw
  • Smyrna
  • Decatur
  • Duluth
  • Statesboro
  • Milledgeville
  • Blue Ridge

Georgia Awning FAQs

Do you ship awnings to Georgia?

Yes. We ship factory-direct from Tampa to every ZIP code in Georgia, including Atlanta, Savannah, Augusta, Columbus, Macon, and Athens. Freight shipping is free to all 48 contiguous states, and orders arrive either as a DIY knock-down kit or as a fully assembled crated unit.

How much do aluminum awnings cost in Georgia?

Because every unit is custom-built, price depends on size, style, and finish rather than on your location — shipping to Georgia is free, so a Georgia customer pays the same as a Florida customer for the same awning. Retractable awnings start around $1,924. Send us your measurements and we will quote the exact configuration.

Will an aluminum awning hold up to Georgia humidity and coastal salt air?

Yes. All-aluminum framing cannot rust, every fastener is stainless steel, and the architectural powder coat covers 100% of each surface — including the underside and edges where cheaper awnings are left bare and start corroding first. This is the same construction we build for Florida's Gulf and Atlantic coasts, so Savannah, Brunswick, and St. Simons are well within its design range.

Do you have installers in Georgia?

Our own installation crews work the Tampa Bay area. Georgia orders ship as either a DIY kit that a reasonably handy homeowner can hang, or as a fully assembled crated unit that any local contractor, handyman, or commercial installer can mount in a few hours. We provide the drawings and phone or video support during the install at no charge.

Can you match a specific color for an Atlanta HOA or a Savannah historic district?

Yes. As the manufacturer we powder-coat to any RAL color, plus a range of aluminum woodgrain finishes that read as wood but never need staining. If your HOA or historic review board specifies a color or a profile, send us the requirement and we will build to it and supply drawings for your submittal.

How long does a Georgia order take?

Typical production runs a few weeks depending on the product and current queue, plus freight transit from Tampa — usually one to three days to Georgia. Call 1-800-296-4647 for the current lead time on your specific product before you order.

Get a Custom Quote for Your Georgia Project

Tell us your sizes, finish, and delivery address. We will build it in Tampa and ship it free to Georgia — residential or commercial, anywhere in the state.

Call 1-800-296-4647 • Request a Quote

Serving other states? See all 1800Awnings service areas.