Aluminum Bahama Shutters

Custom Aluminum Bahama Shutters, Built in Tampa

1800Awnings has built Bahama shutters in our own Tampa, Florida factory since 1987. Our crew cuts, welds, powder coats and crates every shutter to your size, then ships it to any of the 48 contiguous states, usually 2–3 weeks after you order. Prices are posted online: Bahama shutters start at $420 (FauxView, 24" × 36"), and a typical 36" × 60" window runs $1,050 to $1,725 depending on style.

A Bahama shutter (also called a Bermuda shutter) hangs from a hinge above the window and props out at an angle on support arms. Open, it works like a louvered awning: it shades the glass before the sun hits it, keeps rain off, lets air through and gives you privacy from the street.

Compare the four styles

Standard widths are 24", 36" and 48" (FauxView up to 104"), and heights run 36" to 72". Custom sizes are available. Every shutter is built to order, so if your window doesn't match a standard size, call 1-800-AWNINGS or request a quote and we'll build it to your exact measurements. For every price by size and whole-house budget examples, see our Bahama shutter cost guide, or read the side-by-side style comparison.

How we build them

• Powder-coated aluminum frames and louvers that won't rot, warp or rust in salt air, and never need painting.
• Built by our own fabricators in Tampa. We make these shutters; we don't resell someone else's.
• 35+ in-house powder-coat colors, from Pure White and Bengal White to Bronze, Matte Black, Sky Blue and Emerald Green, plus woodgrain finishes that look like stained wood.
• Top-hinged with adjustable support arms so you set the angle for shade or view. Fixed arms are available.
• Stainless steel fasteners for coastal installs.

Permits, engineering and storms

Many Florida cities and counties treat Bahama shutters as exterior attachments that must meet Florida Building Code wind loads. If your building department asks for signed and sealed engineering, add it from Extra Services: $350 for a standard letter or $500 for expanded scope. A $50 fastener kit puts anchors matched to your wall type (block, poured concrete, brick or wood frame) in the box.

Bahama shutters are shade and architectural shutters. Closed and secured, they add a layer against wind-driven rain and debris, but they are not automatically code-approved hurricane protection. If your home needs rated storm protection, check with your building department or call us about your wind zone.

Installation

Shutters ship finished and ready to mount, and handy homeowners often install them with a drill and a helper. Our DIY install guide walks through it. In the Tampa Bay area, our team can measure and install, and elsewhere we can connect you with a dealer or installer.

Bahama shutter FAQs

How much do Bahama shutters cost?

At 1800Awnings, Bahama shutters cost $420 to $3,640 each, priced by style and size. A standard 36" × 60" window runs $1,452 (ClearView), $1,613 (ShadeView), $1,725 (DecoView) or $1,050 (FauxView).

What's the difference between Bahama and Bermuda shutters?

Nothing. They are two names for the same top-hinged, prop-open louvered shutter.

Can I see out through Bahama shutters?

Yes, with ClearView or DecoView. Their angled louvers block direct sun while you look out through them. ClearView gives the most visibility; DecoView adds more privacy. ShadeView gives a filtered view in exchange for more shade.

Are Bahama shutters hurricane rated?

Ours are shade and architectural shutters and are not automatically code-approved hurricane protection. Ask your building department, or call us about your wind zone.

Do I need a permit for Bahama shutters in Florida?

Often, yes. Requirements vary by city and county. If engineering is required, we offer a stamped engineering letter for $350 (standard) or $500 (expanded scope).

Can I get a custom size?

Yes. Every shutter is made to order in our Tampa factory, so we can build any width and height. Send your measurements for a quote.

How do I measure for Bahama shutters?

Measure the outside width and height of the window trim (or the opening, if there's no trim). Pick the nearest standard size, or order a custom size built to your exact measurements. Send us the numbers or a photo and we'll check them for free. See how to measure.

How long does it take to get them?

Most orders ship 2–3 weeks after you confirm size and color.

What does shipping cost?

Shipping on Bahama shutters is quoted by delivery location. Call 1-800-AWNINGS for a delivered price.

Do you sell to contractors and dealers?

Yes. We supply builders, property managers and dealers nationwide. See become a dealer.

Can I return them?

No. Every shutter is made to your measurements, so all sales are final once the order is confirmed. Order a color sample first if you're unsure.

Ready to order? Pick a style above, or call 1-800-AWNINGS (296-4647). Our factory is at 4608 N Hale Ave, Tampa, FL 33614.