Awnings in Pembroke Pines, FL

1800Awnings builds custom shade structures at our own plant in Tampa and delivers them factory-direct to Pembroke Pines, FL — about 270 miles via I-75 across Alligator Alley. No dealer, no middleman, no markup between the extrusion and your patio. We have been manufacturing in Florida since 1987, and we run trucks into South Florida every week — this is not a territory we bought a lead list for.

What Pembroke Pines actually needs from a shade structure

Pembroke Pines is HOA country — almost every request here starts with what the association will approve, not what the patio needs. Insulated patio covers make the biggest difference here — a permanent roof over the slab drops surface temperature enough to make the space usable in July.

Being away from the coast is an easier environment in every way that costs money: no salt load and lower design pressures, which means more of your budget goes into span, motorization and finish instead of corrosion hardware. Inland Florida is the cheapest place in the state to buy a big, well-built cover.

Aluminum patio covers and carports for Pembroke Pines homes and businesses

Every system is cut and built to your opening — there are no stock sizes here. The range we ship into Pembroke Pines most often:

• Retractable awnings — Sunflexx and Sunscape systems, manual or motorized. We are a national master dealer for both lines.
• Motorized retractable awnings — Remote-operated, with optional wind sensors that stow the fabric on their own when an afternoon storm builds over Broward County.
• Aluminum pergolas — Fixed-blade or motorized louvered roofs, freestanding or attached, in spans most contractors will not quote.
• Architectural aluminum canopies — Entrances, walkways, drive-throughs and loading docks — engineered, sealed and stamped.
• Aluminum patio covers — Insulated or open-frame roofs over a slab, plus carports. The cheapest permanent temperature drop you can buy.
• Motorized & hurricane screens — One track system that does insect screen, solar screen and storm protection depending on the mesh you choose.
• Window awnings — Including Bahama shutters in ClearView, FauxView and DecoView.
• Door awnings — Small entrance canopies for front doors, side doors and service entries.
• Wood-grain aluminum finish — ARCHEX powder-coat that reads as timber from the street and maintains like aluminum.

Wind load, permits and HOA approval in Broward County

Pembroke Pines is inside the High-Velocity Hurricane Zone. In practice that means a Broward County inspector will ask for a Florida Product Approval or Miami-Dade Notice of Acceptance number before anything gets attached to your wall, and generic imported awnings do not carry one. Every aluminum system we build for Pembroke Pines ships with the engineering package, load calculations and approval documentation your permit application needs — we prepare it as part of the order, not as an extra.

Neighborhoods and communities we serve around Pembroke Pines

We deliver and install throughout Chapel Trail, Pembroke Falls, Silver Lakes, Miramar, Cooper City, Davie and Towngate — and across the rest of Broward County. If you are just outside that list, we almost certainly still cover you; South Florida is a regular run for our trucks.

Pembroke Pines awning pricing

Factory-direct pricing, FL sales tax where it applies, and free freight:

• Retractable awnings — from $1,924 manual, $2,249 motorized
• Aluminum & louvered pergolas — typically $6,500–$18,000
• Patio covers & carports — quoted by span and roof type
• Commercial canopies, Bahama shutters & screens — quoted to the opening

Want a real number rather than a range? Send dimensions and a photo of the wall and we will come back with a firm quote, usually within the hour. See the full awning cost guide or read how to measure your opening first.

Frequently asked questions — awnings in Pembroke Pines, FL

Do you install awnings in Pembroke Pines, FL?

Yes. We manufacture in Tampa and serve Pembroke Pines and the rest of Broward County directly, about 270 miles from the plant via I-75 across Alligator Alley. We also ship factory-direct to all 48 contiguous states with free freight, so you can buy from us and use your own installer if you prefer.

How much do awnings cost in Pembroke Pines?

Retractable awnings run roughly $1,924 to $6,000 depending on width, projection and whether you go motorized. Aluminum and louvered pergolas typically land between $6,500 and $18,000. Canopies, Bahama shutters and hurricane screens are quoted to the opening. Because we are the manufacturer, there is no dealer markup in any of those numbers.

Will an awning survive hurricane season in Broward County?

Our aluminum systems are engineered to Florida design wind speeds and, for Pembroke Pines, to High-Velocity Hurricane Zone requirements with the product approval documentation to prove it. Retractable fabric systems are designed to be stowed before a named storm — the frame stays, the fabric rolls in. Fixed aluminum structures are engineered to stay put.

Do I need a permit for an awning in Pembroke Pines?

Most attached structures in Broward County do. We supply the engineering package, wind-load calculations and product approval numbers your permit application needs. If your community has an architectural review committee, we can also supply finish samples and elevation drawings for approval.

How long does it take to get an awning in Pembroke Pines?

Quotes usually come back within an hour during business hours. Manufacturing runs two to three weeks from approved order, and freight to Pembroke Pines is included. Rush schedules are sometimes possible — ask when you call.

Nearby cities we serve

Awnings in Hollywood · Awnings in Fort Lauderdale · Awnings in Hialeah · All Florida service areas

Request a free quote for your Pembroke Pines project or call 1-800-296-4647. Manufactured in Tampa, shipped free to all 48 states, 2–3 week lead times.