Awnings in Pompano Beach, FL

1800Awnings builds custom shade structures at our own plant in Tampa and delivers them factory-direct to Pompano Beach, FL — about 260 miles via I-75 across Alligator Alley. Factory-direct pricing, installed by our team or an authorized local dealer. We have been manufacturing in Florida since 1987, and we run trucks into South Florida every week — this is not a territory we bought a lead list for.

What Pompano Beach actually needs from a shade structure

Pompano's mid-century condo stock is being re-clad wholesale, and boards want one approved shade spec they can roll out building-wide. Fixed aluminum canopies carry the load here: entrances, walkways and drive-throughs that have to stand up year-round without anyone touching a switch.

On the water we switch to our coastal package as standard: stainless fasteners, marine-grade powder coat and sealed end caps. It is the difference between a finish that still looks new in year eight and one that chalks and streaks by year three. If your project is on a barrier island or directly on a canal or the Intracoastal, tell us — it changes the hardware, not the price of the frame.

Architectural and commercial canopies for Pompano Beach homes and businesses

Every system is cut and built to your opening — there are no stock sizes here. The range we ship into Pompano Beach most often:

• Retractable awnings — Sunflexx and Sunscape systems, manual or motorized. We are a national master dealer for both lines.
• Motorized retractable awnings — Remote-operated, with optional wind sensors that stow the fabric on their own when an afternoon storm builds over Broward County.
• Aluminum pergolas — Fixed-blade or motorized louvered roofs, freestanding or attached, in spans most contractors will not quote.
• Architectural aluminum canopies — Entrances, walkways, drive-throughs and loading docks — engineered, sealed and stamped.
• Aluminum patio covers — Insulated or open-frame roofs over a slab, plus carports. The cheapest permanent temperature drop you can buy.
• Motorized & hurricane screens — One track system that does insect screen, solar screen and storm protection depending on the mesh you choose.
• Window awnings — Including Bahama shutters in ClearView, FauxView and DecoView.
• Door awnings — Small entrance canopies for front doors, side doors and service entries.
• Wood-grain aluminum finish — ARCHEX powder-coat that reads as timber from the street and maintains like aluminum.

Wind load, permits and HOA approval in Broward County

Pompano Beach is inside the High-Velocity Hurricane Zone. In practice that means a Broward County inspector will ask for a Florida Product Approval or Miami-Dade Notice of Acceptance number before anything gets attached to your wall, and generic imported awnings do not carry one. Every aluminum system we build for Pompano Beach ships with the engineering package, load calculations and approval documentation your permit application needs — we prepare it as part of the order, not as an extra.

Neighborhoods and communities we serve around Pompano Beach

We deliver and install throughout Lighthouse Point, Deerfield Beach, Coconut Creek, Hillsboro Beach, Cypress Bend and Palm Aire — and across the rest of Broward County. If you are just outside that list, we almost certainly still cover you; South Florida is a regular run for our trucks.

Pompano Beach awning pricing

Factory-direct pricing, FL sales tax where it applies, and free freight:

• Retractable awnings — from $3,064 manual (Eastern SunScape) and $4,322 motorized (Shademaker Zeus, motor included)
• Aluminum & louvered pergolas — typically $6,500–$18,000
• Patio covers & carports — quoted by span and roof type
• Commercial canopies, Bahama shutters & screens — quoted to the opening

Want a real number rather than a range? Send dimensions and a photo of the wall and we will come back with a firm quote, usually within the hour. See the full awning cost guide or read how to measure your opening first.

Frequently asked questions — awnings in Pompano Beach, FL

Do you install awnings in Pompano Beach, FL?

Yes. We manufacture in Tampa and serve Pompano Beach and the rest of Broward County directly, about 260 miles from the plant via I-75 across Alligator Alley. We also ship factory-direct to all 48 contiguous states with free freight, so you can buy from us and use your own installer if you prefer.

How much do awnings cost in Pompano Beach?

Retractable awnings run roughly $3,064 to $15,000 for residential models depending on width, projection and whether you go motorized. Aluminum and louvered pergolas typically land between $6,500 and $18,000. Canopies, Bahama shutters and hurricane screens are quoted to the opening. These are factory-direct prices.

Will an awning survive hurricane season in Broward County?

Our aluminum systems are engineered to Florida design wind speeds and, for Pompano Beach, to High-Velocity Hurricane Zone requirements with the product approval documentation to prove it. Retractable fabric systems are designed to be stowed before a named storm — the frame stays, the fabric rolls in. Fixed aluminum structures are engineered to stay put.

Do I need a permit for an awning in Pompano Beach?

Most attached structures in Broward County do. We supply the engineering package, wind-load calculations and product approval numbers your permit application needs. If your community has an architectural review committee, we can also supply finish samples and elevation drawings for approval.

How long does it take to get an awning in Pompano Beach?

Quotes usually come back within an hour during business hours. Manufacturing runs two to three weeks from approved order, and freight to Pompano Beach is included. Rush schedules are sometimes possible — ask when you call.

Nearby cities we serve

Awnings in Fort Lauderdale · Awnings in Boynton Beach · Awnings in Hollywood · All Florida service areas

Request a free quote for your Pompano Beach project or call 1-800-296-4647. Manufactured in Tampa, shipped free to all 48 states, 2–3 week lead times.