G Series Canopy Sizes Explained: 6", 8", 10" & 12" Fascia Heights Compared (2026)
What Are G Series Canopy Sizes?
The G Series Canopy System from 1800Awnings is an architectural, extruded-aluminum entrance canopy sold in four fascia heights: 6", 8", 10", and 12". "Fascia height" refers to the depth of the front face — the C-channel band that runs along the leading edge of the canopy and houses the integrated G-Gutter drainage channel. All four sizes share the same core engineering, finishes, and integrated gutter; the difference is the proportion of the front face and how much structural depth is available for wider projections.
Choosing a G Series size is really about matching the fascia proportion to your building's scale and the projection you need. A 6" fascia reads clean and minimal over a residential service door in Tampa; a 12" fascia carries visual weight across a wide commercial storefront or loading dock in Florida's coastal weather. This guide breaks down the exact price ranges, ideal uses, and selection logic for each size so you order the right one the first time.
Key Specifications
| Feature | Detail |
|---|---|
| Product line | G Series Canopy System (Architectural G-Gutter Canopy) |
| Fascia heights | 6", 8", 10", 12" |
| Material | Architectural-grade extruded aluminum (not roll-formed) |
| Finish | Powder coated inside and out; wood grain sublimation optional |
| Drainage | Integrated G-Gutter channels water away from doors and walls |
| Construction | Welded (fully assembled) or knock-down kit |
| Fascia design | C-channel front face |
| Standard widths | 4', 4'6", 5' and up (custom widths available) |
| Standard projections | 2' to 5' (custom projections available) |
| Bracket/arm options | Multiple arm styles |
| Best for | Doors, storefronts, service entries, loading docks, warehouses |
Why G Series Fascia Height Matters
Proportion to the building
Fascia height is the single most visible design choice on a canopy. A shallow 6" band disappears into a modern facade and keeps the focus on the door; a deep 12" band becomes an architectural statement and holds its own against tall storefronts, brick warehouses, and multi-bay loading docks. Match the fascia to the mass of the wall behind it.
Structural depth for wider projections
A taller fascia gives the front C-channel more depth, which helps the canopy stay rigid as projection increases. If you are pushing out to a 4' or 5' projection over a wide opening, the 10" and 12" profiles carry that reach with more presence and a more substantial look than a shallow band would.
Integrated G-Gutter on every size
Every G Series size includes the integrated G-Gutter that channels rainwater away from the door and building wall — a real advantage in Tampa and across Florida, where afternoon downpours are routine. You do not sacrifice drainage performance by choosing a smaller fascia; the gutter is engineered into all four heights.
Extruded aluminum, not roll-formed
Regardless of size, the G Series is fabricated from architectural-grade extruded aluminum rather than the thin roll-formed metal used in budget canopies. That means better rigidity, no rust, and powder coating inside and out. Taller fascias simply give you more of that same heavy-duty material across the front face.
One look, four scales
Because all four sizes share the same C-channel design language, finishes, and wood grain sublimation option, you can standardize the G Series across a property — a 6" over side doors, a 12" over the main entrance — and keep a consistent architectural look at different scales.
How to Choose: 6" vs 8" vs 10" vs 12"
The right fascia height depends on opening width, projection, and how much visual weight the facade can carry. Use this as a starting point:
| Fascia | Look | Typical use | Starting price (welded) |
|---|---|---|---|
| 6" | Minimal, low-profile | Residential doors, narrow service entries, modern facades | from $1,896 |
| 8" | Balanced, versatile | Standard entry doors, small storefronts, patios | from $1,945 |
| 10" | Substantial | Wider storefronts, commercial entries, taller walls | from $2,315 |
| 12" | Bold, architectural | Loading docks, warehouses, wide multi-bay openings, statement entrances | from $2,685 |
As a rule: the wider the opening and the deeper the projection, the taller the fascia should be to stay visually balanced. For narrow residential doors, 6" or 8" usually looks best. For commercial storefronts, loading docks, and anywhere the canopy needs to be seen from the street, step up to 10" or 12".
Pricing by Size
Prices below are live starting prices for welded units and reflect the fascia height plus width/projection. Every size scales up with wider openings and longer projections; custom sizes are quoted individually.
| Size | Smallest config (4'W × 2'P) | Mid config (5'W × 4'P) | Largest listed config |
|---|---|---|---|
| 6" G Series | $1,896 | $2,881 | up to $7,200 |
| 8" G Series | $1,945 | $2,907 | up to $7,147 |
| 10" G Series | $2,315 | $3,633 | up to $9,506 |
| 12" G Series | $2,685 | $4,359 | up to $11,865 |
Notice that at the smallest sizes the price gap between 6" and 8" is small (about $50), so the choice there is almost purely aesthetic. The bigger jumps come at the 10" and 12" profiles, which use more material and are built for larger, more demanding installations.
Who Is Each Size Best For?
- 6" fascia — Homeowners wanting a clean, low-profile canopy over a front or side door; modern and minimalist facades.
- 8" fascia — The versatile middle ground for standard residential entries, small storefronts, and patio doors.
- 10" fascia — Commercial storefronts, wider entries, and buildings with taller walls that need more visual weight.
- 12" fascia — Loading docks, warehouses, fulfillment centers, and wide statement entrances where the canopy should command attention.
- Any size — Florida property owners who need extruded-aluminum durability with integrated drainage that stands up to sun, salt air, and heavy rain.
How to Order
- Measure your opening width and decide how far out you need the canopy to project (2'–5' standard).
- Choose your fascia height using the guidance above — smaller for residential doors, larger for commercial and wide openings.
- Pick welded (fully assembled) or a knock-down kit for easier shipping and field assembly.
- Select your finish: a powder coat color or wood grain sublimation.
- Order online at the size-specific product page — 6", 8", 10", or 12" — or call 1-800-AWNINGS (296-4647) for help sizing.
Frequently Asked Questions
What is the difference between the G Series canopy sizes?
The sizes refer to fascia height — the depth of the front C-channel face: 6", 8", 10", or 12". All four share the same extruded-aluminum construction, integrated G-Gutter drainage, and finish options. A taller fascia gives a bolder look and more structural depth for wider projections; a shorter fascia reads more minimal.
How do I choose the right G Series fascia height?
Match the fascia to your opening width and building scale. Narrow residential doors look best with a 6" or 8" fascia. Wider storefronts, commercial entries, and loading docks call for a 10" or 12" fascia so the canopy stays visually balanced and carries the projection well.
How much does a G Series canopy cost?
Welded G Series canopies start at $1,896 for the 6", $1,945 for the 8", $2,315 for the 10", and $2,685 for the 12" at the smallest 4' × 2' configuration. Prices scale up with width and projection, reaching roughly $7,000–$11,900 for the largest listed configurations. Custom sizes are quoted individually.
Does every size include the integrated gutter?
Yes. The integrated G-Gutter that channels rainwater away from the door and building wall is engineered into all four fascia heights. You do not lose any drainage performance by choosing a smaller fascia — an important feature for Tampa and Florida rain.
Can I get a larger projection with a bigger fascia?
Standard projections run from 2' to 5' across all sizes, and custom projections are available. A taller 10" or 12" fascia provides more structural depth at the front face, which pairs naturally with the deeper 4'–5' projections and wider openings.
Are G Series canopies good for Florida weather?
Yes. They are built from architectural-grade extruded aluminum that is rust-free and powder coated inside and out, with integrated drainage to manage heavy rain. That combination holds up well to Florida sun, salt air, and downpours whether installed on a Tampa home or a coastal commercial building.
What is the difference between welded and knock-down?
Welded units arrive fully assembled for the fastest installation. Knock-down kits ship in pieces for easier, lower-cost shipping and are assembled in the field. Both are available across all four fascia sizes.
Can I mix sizes on the same building?
Yes, and many commercial properties do. Because all four sizes share the same C-channel design and finishes, you can use a smaller 6" or 8" over side and service doors and a bold 12" over the main entrance for a consistent look at different scales.
Bottom Line
The G Series Canopy System gives you one architectural look in four scales. The fascia height — 6", 8", 10", or 12" — is mostly a decision about proportion: shallow bands for clean residential doors, deep bands for commercial storefronts, loading docks, and statement entrances. Every size delivers the same extruded-aluminum durability, integrated G-Gutter drainage, and powder-coated or wood grain finish, so you are choosing presence and price point, not performance.
For most homes, a 6" or 8" fascia is the sweet spot; for commercial and wide openings, the 10" and 12" carry the scale and projection with authority. Measure your opening, decide how far out you need to project, and pick the fascia that matches your building. When in doubt, the team at 1800Awnings can size it for you.
Ready to order your G Series canopy? Compare the 6", 8", 10", and 12" sizes at 1800awnings.com, or call 1-800-AWNINGS (296-4647). Serving Tampa, Florida, and nationwide.
Written by Corey Courtright | 1800Awnings.com | Tampa, FL
Written by Corey Courtright
Second-Generation Awning Manufacturer & Industry Expert
Corey Courtright is a second-generation awning manufacturer and a recognized innovator in aluminum TIG-welded structures within the awning industry. With over 38 years of hands-on experience, he has worked across every facet of the business—from fabrication and sewing to welding, installation, sales, and service—giving him a rare, comprehensive understanding of the craft. Starting his career as a pipe threader, Corey went on to build and lead multiple successful awning companies. Now based in Florida since 2016, he brings deep technical expertise, proven leadership, and a legacy of innovation to every project and insight he shares.